Loading...
Serving Eureka, CA and surrounding areas. (707) 572-3718
Eureka Insulation serves Myrtletown homeowners with air sealing, attic insulation, and crawl space moisture control - with 10+ years serving Eureka neighborhoods and free written estimates on every job.
Myrtletown homes built before 1960 lose a significant amount of heat through unsealed gaps around chimneys, plumbing stacks, and wall top plates in the attic. Our air sealing services close these bypasses so your heating system actually keeps up without running constantly.
Victorian and Craftsman homes in Myrtletown commonly have thin, settled attic insulation that no longer meets current R-value standards for Eureka's wet, cool climate. Adding blown-in insulation over existing material brings the attic up to depth quickly without disturbing the living space below.
Many Myrtletown homes sit on pier-and-beam foundations with open crawl spaces that admit ground moisture year-round. Proper crawl space insulation combined with a vapor barrier keeps floors warmer and prevents the slow wood rot that fog and rain drive in older Eureka-area homes.
Pre-war wood-frame homes in Myrtletown were almost never built with wall insulation - the lumber was cheap, and energy costs were not a concern at the time. Dense-pack blown-in insulation fills existing wall cavities without removing drywall, making a measurable difference in how rooms feel on cold, foggy Eureka mornings.
With Humboldt Bay fog rolling through Myrtle Avenue and surrounding streets for much of the year, ground moisture under older Myrtletown homes stays elevated. A properly installed crawl space vapor barrier cuts the moisture load that ages wood framing and subfloor sheathing prematurely.
Blown-in cellulose or fiberglass insulation is the fastest way to upgrade an attic in a Myrtletown home that still has original or thinned-out material. The material fills around rafters, electrical runs, and irregular framing without gaps - which matters in older homes where nothing is perfectly square or evenly spaced.
Myrtletown sits on the northeast side of Eureka, inside the city limits, and carries some of the oldest housing stock on the North Coast. Many homes here were built before 1940 - some date to the late 1800s and early 1900s when Eureka's lumber industry was at its peak. That era of construction meant beautiful wood framing, steep-pitched roofs, and decorative Victorian trim, but also no wall insulation, no vapor control, and attic spaces that were never designed to be sealed. The combination of cold, foggy winters and original construction techniques means heat loss in these homes is far higher than in newer builds, and the moisture that follows every wet season has decades to work its way into the framing.
Eureka averages around 40 inches of rain per year, most of it falling between November and March. Relative humidity in Myrtletown stays high year-round because of the neighborhood's proximity to Humboldt Bay and the coast. That persistent moisture accelerates wood rot in crawl spaces, compresses and degrades older fiberglass insulation, and feeds the mold growth that older, unventilated attics collect over time. Humboldt County also sits near the Cascadia Subduction Zone, and the 2022 earthquake reminded many Eureka-area homeowners that older foundations and crawl space framing deserve a close look. These are not generic concerns - they are the specific, real conditions that shape every insulation job we do in this part of Eureka.
Our crew works in Myrtletown regularly and encounters the same building conditions on nearly every job: original wood-frame construction from the early 1900s, uninsulated wall cavities, vented crawl spaces with decades of accumulated moisture damage, and attic spaces that were never air sealed. Because Myrtletown is within Eureka city limits, any permitted work goes through the City of Eureka Building Division - and we know what that process requires for insulation and energy work.
Myrtletown is bounded roughly by Harris Street to the south and Myrtle Avenue running through the center - the street that gave the neighborhood its name. It is a quiet, established residential area with mature trees, older concrete driveways, and homes that have been in families for generations. We see a lot of owner-occupied Victorian and Craftsman bungalows here where the original construction is still largely intact - which means we need to work carefully around original trim, plaster walls, and older electrical runs rather than treating every job like a new-build retrofit.
We also serve neighboring Humboldt Hill to the south and Cutten to the southeast - both areas with different housing stock and permit processes that our crew handles regularly.
Contact us by phone at (707) 572-3718 or through our online form and we will respond within one business day. We ask a few questions about your home so we can schedule the right amount of time for the visit.
We visit your Myrtletown home, inspect the attic, crawl space, and exterior walls, and walk you through what we find - including current R-values and any moisture or air sealing concerns. You get a written estimate with itemized costs before we leave. No pressure to decide on the spot.
Once you approve the estimate, we schedule the work at a time that fits you. Most Myrtletown jobs - attic air sealing plus blown-in insulation - are completed in one to two days, and you do not need to vacate your home during standard attic or crawl space work.
When the work is done, we walk through the completed areas with you, confirm the scope was fully delivered, and leave the space clean. We are available by phone after the job if you have questions about how the new insulation is performing.
We serve Myrtletown and surrounding Eureka neighborhoods. Free written estimates, no obligation, and replies within one business day.
(707) 572-3718Myrtletown is a residential neighborhood on the northeast side of Eureka, sitting within the city limits and sharing city services with the broader Eureka community. The neighborhood takes its name from Myrtle Avenue, one of its main streets, and is known locally as a quieter, more affordable alternative to the waterfront or Old Town districts. The housing stock here is predominantly Victorian-era and Craftsman bungalow construction from the late 1800s through the early 1900s - a direct product of Eureka's lumber boom, when old-growth timber made wood-frame homes inexpensive to build. Many of these homes still have their original wood siding, front porches, and decorative trim, and they are mostly owner-occupied by long-term Eureka residents. The neighborhood is a short drive from Old Town Eureka and the historic waterfront, and residents are close to schools, shopping, and Humboldt Bay.
The neighborhood has a mix of single-family homes and a smaller number of older multi-family properties - some Victorian-era homes have been converted to duplexes over the decades. Lots are modest in size with mature trees and older landscaping, and the neighborhood has a genuine community feel that draws homeowners who want to put down roots. Myrtletown is adjacent to Eureka proper - where our home base is located - and we serve customers across the entire city, including the nearby community of Bayside just to the north along Highway 101.
Fills irregular spaces evenly for consistent whole-home thermal coverage.
Learn MoreProtects floors and pipes from cold and moisture in the crawl space.
Learn MoreHigh-density foam that blocks air, moisture, and adds structural strength.
Learn MoreLightweight foam ideal for interior walls and soundproofing applications.
Learn MoreCommercial-grade insulation for offices, warehouses, and retail spaces.
Learn MorePrevents ground moisture from entering your crawl space and home.
Learn MoreProfessional vapor barrier installation to control indoor humidity levels.
Learn MoreMyrtletown homes lose heat through gaps and thin attics that are quick to fix. Call now or submit an estimate request - we respond within one business day.